Safety Precautions. (1) Ground the fueling/defueling equipment (vehicle or fuel hydrant equipment) to the airplane with designated grounding cable(s). Ensure fueling/defueling equipment is grounded to an approved static ground. Ground the airplane to an approved static ground with grounding cable.
How do you refuel an aircraft safely?
There are several steps of aircraft refueling and it starts with the grounding of aircraft and the fuel tanker. Do not drag the hose along the leading edge. Next, connect the fueling nozzle grounding cable to the aircraft grounding receptacle and immediately remove the filler cap.
What safety precautions should you take while filling the fuel tank?
It should be kept in mind that gasoline is not spilled and its vapors are not spread as well. People would make a big mistake if they left on motors, fans or engines while fueling. Inhaling the fumes of gasoline is also very toxic. Therefore, it is suggested not to keep face toward the container while opening the cap.
What are the dangers of refueling an aircraft?
The primary risk is unintended ignition of fuel vapour, which can occur by a single spark. A sufficient quantity of fuel vapour to create a high risk of ignition may result from spillage arising from procedural errors, leaks, aircraft tank venting or failure of pressurized fuel lines or their couplings.
What are the safety precautions in line maintenance?
Bump caps protect you from an accidental collision with an aircraft part. Hard hats protect you from falling objects. Safety glasses, a face shield, and goggles protect your face and eyes, depending on the task and materials. Coveralls and rubber gloves and boots protect your hands and feet from chemicals.
Can you refuel a plane with passengers on board?
Refuelling with Kerosene (JET A, JET A1 JP8, TS1, RT, TH or equivalent, in accordance with the approved Aircraft Flight Manual), is allowed when passengers are boarding, on board, or disembarking.
What is a fueling agent?
The Fuel Agent is responsible for fueling and servicing aircraft and the safe and efficient operation of equipment used in fueling aircraft in an exterior work environment that involves diverse weather conditions. Major Responsibilities and Functions: ➢ Perform fueling in safe and efficient manner.
How can you prevent static sparks while filling a boat’s fuel tank?
While Fueling Your Boat
- Keep the nozzle of the fuel-pump hose in solid contact with the tank opening to prevent producing a static spark.
- Use caution and fill the tank slowly to avoid spilling fuel into the boat’s bilge or into the water. …
- Never fill a tank to the brim—leave room for fuel to expand.
What are some safe fueling practices?
Turn off engine(s), electronics, and extinguish all open flames. Keep the nozzle in contact with the edge of the fill to prevent build up of static electricity to prevent sparking. Don’t top off your tank. Know how much fuel your tank holds and fill it to about 90%.
Why should a boats gas tank never be completely filled?
It’s important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow. … After you’re done fueling, tightly replace the gas cap. This will prevent the escape of fuel vapors.
Why is a build up of charge dangerous?
Static electricity can build up in clouds. … It is dangerous when you touch something with a large electric charge on it. The charge will flow through your body causing an electric shock. This could cause burns or even stop your heart.
Is Jet Fuel hazardous?
Hazard statements H226 Flammable liquid and vapour. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H304 May be fatal if swallowed and enters airways.
Why are airplanes grounded before refueling?
We ground an aircraft during the refueling process to ensure that the plane and the refueling apparatus are at the same electrical potential and to dissipate the electrical charge that is generated by the fuel transfer process.
What is aircraft line maintenance?
Line maintenance means any maintenance that is carried out before flight to ensure that the aircraft is fit for the intended flight. It may include: trouble shooting; defect rectification; component replacement with the use of external test equipment, if required.
What is heavy maintenance?
Heavy Maintenance means work that is not carried out routinely as part of day-to-day operations and requires the vehicle to be removed from service.
What is reliability in aircraft maintenance?
The purpose of a reliability program is to ensure that the aircraft maintenance program tasks are effective and their periodicity is adequate, in addition, the reliability program may result in the escalation or deletion of a maintenance task, as well as the de-escalation or addition of a maintenance task.