What is a conformity inspection?
The purpose of an aircraft conformity inspection is to verify that your aircraft conforms to its type design and is configured/bridged to your approved program and operations. … Submit a letter of corrections to the CPM if there are discrepancies found during the FAA’s conformity evaluation.
What determines whether or not a 100-hour inspection is required for an aircraft?
What determines whether or not a 100-hour inspection is required for an aircraft? 100-hour inspections are required only on aircraft that carry persons for hire or are used to give flight instruction for hire. 2. … An A&P mechanic who holds an Inspection Authorization.
What CFR requires the 100-hour inspection of an aircraft engine?
Annual and 100-Hour Inspections. Annual and 100-hour inspections must be accomplished using a checklist as required by 14 CFR part 43, § 43.15(c).
What additional inspection must be performed if the cylinder compression is weak?
What additional inspection must be performed if the cylinder compression is weak? Perform an internal cylinder inspection for improper internal tolerances.
What FAA form is approved for major alteration for return to service?
The person who performs or supervises a major repair or major alteration must prepare FAA Form 337. The form is executed at least in duplicate and is used to record major repairs and major alterations made to an aircraft, airframe, powerplant, propeller, appliance, or a component part thereof.
What section in the instructions for continued airworthiness is FAA approved?
This section (§ 33.4) contains requirements for preparing Instructions for Continued Airworthiness (ICA’s) for aircraft engines. Although this AC does refer to regulatory requirements that are mandatory, this AC is not, in itself, mandatory.
What are three different types of inspections that should be accomplished when overhauling an engine?
There are 3 basic categories of inspection during overhaul: visual, structural non-destructive testing (NDT) and dimensional.
What is a routine inspection aviation?
Routine inspection – A visual examination or check of an item in which no disassembly is required.
What seven items must be checked before returning a reciprocating engine aircraft to service after an annual or 100 hour inspection?
prior to returning a reciprocating engine to service after a 100-hour inspection, what operational checks must be performed? Check the power output (static and idle r.p.m.), check magnetos, fuel and oil pressure check, cylinder and oil temperature check.
What is the difference between an annual inspection and a 100-hour inspection?
What is the difference between an annual inspection and a 100-hour inspection? The inspections themselves are identical. An annual inspection can be performed only by an A&P mechanic who holds an Inspection Authorization, while a 100-hour inspection can be performed by an A&P mechanic without an IA.
Can you overfly a 100-hour inspection?
The annual inspection of the airplane must be completed no later than every 12 calendar months. … You must now complete a 100-hour inspection under 14 CFR 91.409. You can overfly this 100-hour limit by up to 10 hours, but only to reposition the aircraft for its required 100-hour inspection.
Who can perform an annual inspection on an aircraft?
With limited exceptions, only a certified mechanic holding an inspection authorization (IA) can perform an annual inspection in accordance with 14 CFR 91.409(a)(1). Thus, unless the owner-pilot also holds an IA, he or she is not permitted to assist with the inspection function of an annual.
Who is responsible for upkeep of the required maintenance records for an aircraft?
Responsibilities. Part 91, § 91.417 states that an aircraft owner/operator shall keep and maintain aircraft maintenance records.
Do you have to clean the aircraft and engine prior to a 100 hour inspection?
(a) Each person performing an annual or 100-hour inspection shall, before that inspection, remove or open all necessary inspection plates, access doors, fairing, and cowling. He shall thoroughly clean the aircraft and aircraft engine.