What is Aircraft zone?
Zones are designated physical areas of an aircraft that identify where maintenance activities occur. A maintenance task can span multiple zones. … All zone hierarchies must be linked to an aircraft model.
What is aircraft station number?
Fuselage stations (Fus. Sta. or FS) are numbered in inches from a reference or zero point known as the reference datum. [Figure 1] The reference datum is an imaginary vertical plane at or near the nose of the aircraft from which all fore and aft distances are measured.
What is ATA 32?
What is the ATA 100 system?
From Wikipedia, the free encyclopedia. ATA 100 contains the reference to the ATA numbering system which is a common referencing standard for commercial aircraft documentation. This commonality permits greater ease of learning and understanding for pilots, aircraft maintenance technicians, and engineers alike.
What is ATA in aircraft?
Definition. A numerical technical classification of all the systems and sub systems on an aircraft which is universally used in aircraft engineering and aircraft maintenance. It was developed by the former Air Transport Association (ATA) since renamed Airlines for America (A4A).
What is the purpose of aircraft zoning?
Zones are designated physical areas of an aircraft that identify where maintenance activities occur. A maintenance task can span multiple zones. In the Zones application, you can create, delete, or activate zones on an aircraft.
What are the four typical loads on an aircraft?
There are four main load sources acting on an aeroplane – aerodynamic forces, inertia, ground reactions and thrust. The goal of the current work is it to determine its critical combinations.
Where is the buttock line of an aircraft?
Body buttock lines ( BL ) are measurements left or right vertical plane runing through the aircraft’s longitudinal axis. Expressed as LBL or RBL the may tu be used for fuselage locations, particularly in wide bodied aircraft and also wing location on smaller aircraft.
What are the ATA chapter numbers?
|ATA Number||ATA Chapter name|
|ATA 51||Standard Practices And Structures – General|
What is the purpose of ATA?
Air transportation Association (ATA) published a numbering system to learn and understand the technical features of an Aircraft. ATA chapters make it easy to categorize technical information.
What is the ATA?
American Translators Association (ATA) – The Voice of Interpreters and Translators.
What are ATA codes used for?
ATA chapters (sometimes called “ATA 100 System Codes”) are a way of categorizing the various systems that are on a plane, originally created by the Air Transport Association in 1956. Look at any Component Maintenance Manual (CMM) for any civilian aircraft.
What is minimum equipment list for aircraft?
Definitions. A minimum equipment list (MEL) is a list which provides for the operation of aircraft, subject to specified conditions, with particular equipment inoperative (which is) prepared by an operator in conformity with, or more restrictive than, the MMEL established for the aircraft type.
What is spec2000?
The ATA Spec 2000 is an international standard that was subsequently developed to improve communication and information flow between members of the interconnected global supply chain network. Now renamed as Airlines for America, the ATA continues to promote a healthy airline industry in the USA.
What is aircraft maintenance manual?
The formal document which details the way in which all maintenance tasks carried out on an aircraft shall be accomplished. This includes items such as lubrication system functional checks and servicing of the airplane but usually excludes structural repairs and modifications.